Our neoprene fishing wader would be made three times leaking water test before delivery,the leaking water neoprene fishing wader ratio is within 1%,for eaxmple,400pcs order leaking water product quantity is generally 0-3pcs(They are from our customer feedback)
If this situation happens,you could solve it by following instructions
1.First you need to locate the leak to be sealed. Take the neoprene waders into a dark room. Turn on the flashlight. Move the flashlight around in the interior of the waders. The leak will be identified by light streaming through the hole. Mark the leak water location on the both sides of the waders by using the marking pen.
2.Leave the dark room. Lay the fishing waders out on a flat working surface. Clean each leak location thoroughly by using the cleaning alcohol,then leave it to dry.
3.Put on the gloves. Apply neoprene glue/adhesive/sealant directly to the outside of the waders over each leak that is 1/8 of an inch or smaller. Allow to dry overnight.
4.Turn the waders inside out to seal leaks greater than 1/8 inch. Apply adhesive around the area of the leak. Cut a patch from the neoprene patch material to a size that is 1/4 of an inch larger than the leak in all directions. Apply the patch over the adhesive-covered area, pressing down and smoothing out any wrinkles. Allow the seal to dry overnight.
5.Return the waders to their original right-side-out position. Put on the waders and test the leak repair by walking into the water. If there are any leaks, repeat the above steps until all leaks are sealed.
Plz remember to use gloves when working with neoprene glue
How to take care your neoprene fishing wader
1)Store waders in a cool, dry area out of direct sunlight. Sunlight will rapidly deteriorate neoprene.
2)It is better if you could use the wet cloth to make neoprene fishing wader outer side wet each three months,then dry it in cool and shadow place,the neoprene would keep elasticity in this way
